This topic has 1 reply, 2 voices, and was last updated 3 years, 9 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.
feel free to call us +919.557.9162 sdr@sdrobots.com
This topic has 1 reply, 2 voices, and was last updated 3 years, 9 months ago by SuperDroid.
Hi,
I’m making an inspection robot and i want to use the IG32P 24VDC 075 RPM Gear Motor, it’ll be used in pipes where it could be some water and the motor shaft may be submerged in some sections. Does this motor satisfy any specifiaction of water resistance? do you recommend me other motor?(in this case there’s no much space in the chasis so it has to measure the same length).
Thanks,
Omar
Hi. the motors are not sealed. You will need to build an entire housing to keep it watertight.
You must be logged in to reply to this topic.
©2024 SDRobots.com | All rights reserved.