Tagged: serial communication
This topic has 36 replies, 6 voices, and was last updated 2 years ago by beed cons.
- AuthorPosts
- January 27, 2022 at 3:01 pm #8696
SuperDroid
KeymasterThe Jetson nano is 3.3V logic level so I would try to match that if you can.
January 27, 2022 at 4:27 pm #8697scoutingrobot
ParticipantLatest update: Comm. works with MAX232 chip perfectly. But its kind of cumbersome electrical setup. A lot of capacitors.
June 3, 2022 at 3:09 am #9463blingslingkling
ParticipantAlso is the diodes and resistor setup necessary if I am using RS232 to 3.3V TTL adapter for conversion?
June 6, 2022 at 1:16 pm #9468SuperDroid
KeymasterNo, they shouldn’t be needed.
October 27, 2022 at 6:39 am #9544karnaa hai
ParticipantI’m not familiar with the adapter you’re using. However, we use the circuit on page 179 on a regular basis. You can purchase the PCB here. This circuit would replace your adapter, and as the documentation states, the diodes are optional.
December 20, 2022 at 8:24 am #9576england thii
ParticipantThank you for the prompt response.
April 22, 2023 at 4:57 am #9645beed cons
ParticipantOh okay. will follow the same connections and try executing the script once. Will get back to you if I have any doubts.
- AuthorPosts
You must be logged in to reply to this topic.