Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 17, 2016 at 9:02 am #3329
     Vincent
    Participant

    About the torque problem, I’ve thought about another solution : use the 6 inch tires, and opt for a 14:18 ratio.
    With this and the 136 RPM motor, the speed computer gives us 165 feet/min, 15 more than what we need so theoretically we are OK, with a good margin, and with the maximum torque we can have using the IG52 given our speed constraint.
    So my question is: Is using a sprocket with 18 teeth on the gears possible with this robot ?

    March 17, 2016 at 5:35 am #3326
     Vincent
    Participant

    I have another question about shipping: for the entire robot, what are the shipping options, their cost and their expected delays ?

    March 17, 2016 at 4:51 am #3325
     Vincent
    Participant

    After having read the battery term, I’m a bit concerned about the shipping of the Lithium batteries. We are in France, so what whould be possible for the shipping of these batteries, and if it is possible, what delay for the delivery should we expect ?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)