Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 16, 2016 at 9:04 am #2947
     Nicolas Frusciante
    Participant

    Thanks for answering quickly. I already damaged two Saberteeth because the battery had 29.2V after full charge. There is now a short circuit between B- and B+. Do you know which part has blown-off in this case? Is it one of the IC or maybe just a capacitor which I could replace by myself?

    February 15, 2016 at 9:51 am #2942
     Nicolas Frusciante
    Participant

    Thank you for the fast answering! Actually, I have 12 Saberteeth 12×2, but I didn’t test them on this behaviour yet. Working at the moment only with one. But I will report back as soon as the remaining 11 Saberteeth are on work.

    No, I am not using S2 for Estop. Only S1 for Packetized Serial communication with an Arduino Mega 2560 (on TX3). But do you mean by switching S2 to GND might help to wake-up the device?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)